Drop-arm Barrier GDAB-01/02/03:
Technical Data:
1.Material: 304 stainless steel
2.Size(mm):
600*260*1000(GDAB-01);
1080*230*1000(GDAB-02);
1200*260*1000(GDAB-03);
3.Arm Length: 500mm
4.Pass speed: 35 persons/min
5.Certificate: CE,ISO
6.Working Environments: indoor
7.IP Protection: 44
Features and Functions:
1. Fault detection, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The arms are locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Passage can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator
Barrier Gates 
