Bluetooth Reader:
Technical Data:
Dimension
|
280*250*46MM(reader)
1200~1800MM(Bracket)
|
Reader Voltage
|
DC12V
|
Reading Distance
|
Max 15 meters
|
Working Temperature
|
-25 degree centigrade to +85 degree centigrade
|
Features:
1. Oriented identifying vehicles
Infrared and RFID communication technology is applied to this product which sends infrared signal scanning the object in an angle of 60 degree, while RFID signal is transmitted only within the range of infrared signal. Out of this range, the transmission is not accessible and this is the only way to realize precise vehicle identifying.
2. Reading distance adjustable
The Max reading is 15 meters and the signal can pass through vehicle windshield. The reading distance is 3~15 meters through adjusting the reader angle. The recommended reading distance is 6 meters.
3. Energy-saving
In standby status, there is no power consumption.
4. Anti-interference of extra signals
In working mode, the reader is sending a signal with an exclusive code to identify the card with same code. Each reader has its individual code. This avoids neighboring signal interference.
5. Card-reading manners
There are two manners of card reading: automatic card reading and loop detector triggering. It can be setup accordingly.
6. Intermittent signal sending
This reader is for continuous reading. To avoid system breakdown because of card number uploading over too much, the reading signal time is adjustable. The default is 3s.
7. Working Mode
There are two working modes: automatic reading and hand-adjusted reading.
Automatic reading is applied to parking lots in the open air. And hand-adjusted reading is applied to parking areas indoors. Because the infrared signal would be reflected indoors and this may cause confused reading. For example, in an underground parking area, please tune the signal intensity and reader angle into a suitable position.
8. Signal Intensity Adjustable
Tune the signal according to the specific environment.
9. Communication ports available: Wiegand26, RS485.